16
• Point the Seat (22) forward and put the
Seat Post (19) into the Seat Tube (B)
(
figs 10, 11
).
WARNING:
To prevent the seat com-
ing loose and possible loss of control, the
“MIN-IN” (minimum insertion) mark (C) on
the seat post must be below the top of the
Seat Tube (B).
fig 10
22
C
B
19
C
B
Tighten the quick release lever:
•
Move the Quick Release Lever (D) to
the “open” position so the word “open”
is pointing away from the Seat Post
Clamp (E).
NOTE:
The words “open” and “close” are on
opposite sides of the quick release lever.
fig 11
E
B
F
19
D
21
22
Seat Installation (various models) - continued
Seat to Seat Post (Single Bolt Style):
Some models are
equipped with a seat and seat post assembly that uses a
single bolt and nut to secure the seat to the seat post. The
seat is assembled to the seat post at the factory.
Ensure the seat is secure to the seat post and the seat bolt
is tightened. Recommended torque = 7.3 ft-lbs (10 N•m).
Assembly
