DVB-T Running the program search
If since the first start-up of the device other DVB-T programs have started providing
service in your neighbourhood, then you might want run a new search for all the
programs that can be received. This is also necessary if you want to run the device in
another country, for e.g. during a vacation - provided that, DVB-T is also relayed in that
country. For this open the Main Menu > Program Search and select “Automatic” or
“Manual” Search. When you confirm the following dialogue, all receivable programs are
searched and saved in the program space. The previous program list will be replaced.
Volume regulation, Muting
We have equipped the device with a volume control. Press the
VOL+
button to increase
the volume level. Press the
VOL-
button to decrease the volume level.
Press the
MUTE
button to switch of the volume. A “MUTE” appears on the screen. Press
the button once again to restore the volume.
Changing the program
You can sequentially select the saved programs with the
C
/
—
buttons
You can also press the
EPG
button to show the
TV-program list and with
56
buttons can select
the desired program. At any time, on your right
you can see a preview window with the current
program of the selected channel. When you have
found the desired channel, press the ENTER button
to see the program as a full screen picture.
When you know on which program space the desired program is saved, then you can
very easily press the respective numerical buttons of the remote control to change the
program.
When you press the
button you can switch over in each case to the last selected
program.
No matter how you select the sender, after every change, for a few seconds on the
lower border of the screen, a bar appears which displays the important program
information: program space no., program name and tone mode:
10
Содержание DVB-T350
Страница 1: ...5...
