Radio mode
When switching it on the device runs in the radio mode. To switch to radio mode from other
operation modes, push the MODE button so many times until a frequency or the name of a
radio station is shown in the display
.
What is RDS?
RDS (Radio Data System) is a system for transmission of additional information with the FM
radio programme transmitted in many European countries. RDS radio tuner can filter this
information from the transmit signal and use it for various functions. This device uses the
following RDS functions
:
—
Display of the name of the radio station
—
Display of programme type (PTY) and search for programme contents
—
Display of time
in the display. When you are tuned to a station that transmits RDS information, the name of
the radio station is automatically displayed
.
Selecting the frequency band
Press the
BD
/ENTER
button several times to select the desired frequency band: FM1 / FM2 / FM3
= FM, MW 1 / MW 2 = AM (
M
edium
w
ave).
Searching for radio stations
Area Scan
Briefly press the
SCN
button to start a search run that is constantly scanning the current
frequency range. The car radio will play every radio station it finds for a few seconds before
11
11
0
5
25
75
95
100
0
5
25
75
95
100
0
5
25
75
95
100
0
5
25
75
95
100
Automatic or Manual Tuning (Freq Up or Freq Down)
Press the SKIP button or to search for next available station.
Press and hold the SKIP button or will activate MANUAL tuning.
continuing the search run. When the car radio finds a programme you would like to listen to,
press the
SCN
button again to stop the search run
.
