5.
You should also fasten the car radio from behind, if possible. Please refer
to the illustrations below
.
6.
After the installation is completed, re-attach the panel
.
Dismounting
If you once should want to dismount the device, please follow these instructions:
1. Remove the detachable control panel.
2. Pull off the black plastic frame. You
might need some strain to do so.
3. Then insert the unlocking keys one
each left and right through the lateral
slots between the casing front and the
installation frame. That way the metal
pieces with which the installation frame
secures the radio are pushed outward
a bit.
4. Move the unlocking keys deep enough
into the slots so that the notch of the
key is located directly under the plastic
guide.
5. Now slightly lift both keys and use
them to pull out the radio from the
installation frame.
8
1. Device
2. Installation frame
3. Dashboard
4. Hexagonal nut
5. Stop washer
6. Washer
7. Car body
8. Rear mounting
bracket
9. Sheet metal screw
10. M5 x 15 Hexagonal
bolt
Содержание DCR-4000
Страница 1: ...3 ...