3
7. Before tightening the brace, make sure the rear panel section is positioned
evenly on both sides of the patient.
8. To tighten the brace, slip your thumbs through the hole in the pull tabs.
Pull away from your body. When tightened, secure the pull tabs to the loop
exterior. Adjust compression as needed.
(Figure E)
BRACE REMOVAL
9. Detach the pull tabs from the loop exterior to loosen the brace. Unhook
donning mitt from the loop exterior and remove brace.
HOT/COLD PACK (SOLD SEPARATELY)
10. Follow instructions on hot/cold pack. Insert hot/cold pack into pocket and
adhere to back panel.
ADJUSTING PULL TAB LENGTH (OPTIONAL)
11. Remove lace spool from the pull tab pocket and wind lace around the spool to
shorten the length of the pull tab. Unwind lace from the spool to lengthen the
pull tab.
(Figure F)
12. Insert lace spool back into pull tab pocket.
ATTACH/REMOVE BACK PANEL (FOR CLEANING)
13. Open tall rear panel pouch from waist belt. Detach rear panel section by
unlooping waist belt. Remove panel.
(Figure G)
14. Reattach rear panel section by looping waist belt through panel. With tall rear
panel pouch open, lay waist belt on top of lacing guides. Close pouch.
CLEANING INSTRUCTIONS:
Separate the brace’s removable REAR PANEL
before cleaning.
Hand wash in water (86°F/30°C), using soap. Air dry.
NOTE:
If not rinsed thoroughly, residual soap may cause irritation and
deteriorate material.
Do NOT iron.
Do NOT tumble dry.
Do NOT bleach.
MATERIAL CONTENTS:
Nylon, Polyester, Polyethylene, Polyurethane, Cotton,
Acrylic, Polypropylene, Calcium Carbonate, PVC, Synthetic Rubber, Silicone, EVA.
WARRANTY:
DJO, LLC will repair or replace all or part of the unit and its
accessories for material or workmanship defects for a period of six months from
the date of sale. To the extent the terms of this warranty are inconsistent with
local regulations, the provisions of such local regulations will apply.
INTENDED FOR SINGLE PATIENT USE.
LATEX
NOT MADE WITH NATURAL RUBBER LATEX.
NOTICE: WHILE EVERY EFFORT HAS BEEN MADE IN STATE-OF-THE-ART TECHNIQUES TO
OBTAIN THE MAXIMUM COMPATIBILITY OF FUNCTION, STRENGTH, DURABILITY AND
COMFORT, THERE IS NO GUARANTEE THAT INJURY WILL BE PREVENTED THROUGH THE USE OF
THIS PRODUCT .
