FAQ
Phantom 3 4K
User Manual
©
2016 DJI. All Rights Reserved.
53
• The System Status Bar in the app prompts “Initialization Error”.
• No resistance drive if felt on the gimbal.
Various factors contribute to the aircraft initialization error, try resolve the issue by following the suggestions
listed below:
• Sensor performance degraded. This may be due to the excessive bias detected from the IMU or the
compass reading is interfered. Try restarting and calibrating the IMU and compass to resolve this issue.
• Sensor is defective. If the sensors remains unchanged at all time and the problem persist even when the
aircraft is restarted, it indicates the sensor is not working normally. Users should return the aircraft to DJI
for repairing.
• Minor vibration is detected during aircraft initialization. Put the aircraft on the flat surface, power on the
aircraft and ensure the aircraft is stationed for more than 5 seconds to resolve the issue.
• Serious vibration is detected during aircraft initialization. This instance generally occurs when the aircraft
is being initialization on the violent moving surface, for instance, ships that are on the rough sea. Do not
attempt to power on the aircraft in this scenario.
Содержание PHANTOM 3 4K
