Gimbal Camera
Phantom 3 4K
User Manual
34
©
2016 DJI. All Rights Reserved.
Gimbal Operation Modes
Two gimbal operation modes are available. Switch between the different operation modes on the
camera settings page of the DJI GO app. Note that your mobile device must be connected to the remote
controller for changes to take effect. Refer to the table below for details:
Follow Mode The angle between gimbal’s orientation and aircraft’s nose remains
constant at all times.
FPV Mode The gimbal will synchronize with the movement of the aircraft to provide a
first-person perspective flying experience.
A gimbal motor error may occur in these situations: (1) the aircraft is placed on uneven ground
or the gimbal’s motion is obstructed (2) the gimbal has been subjected to an excessive
external force, such as a collision. Please take off from flat, open ground and protect the gimbal
at all times.
Flying in heavy fog or clouds may make the gimbal wet, leading to temporary failure. The
gimbal will recover full functionality after it dries.
②
①
③
Anti-Drop Kit
The anti-drop kit helps keep the gimbal and camera connected to the aircraft. Two pins have been
mounted prior to shipping. If new or additional pins are required, see the diagram below. Press Part
①
through the hole of the vibration absorber and into the center hole of Part
②
, then lock them together
as shown
③
. Mounting the anti-drop kit pins diagonally from each other is recommended.
Содержание PHANTOM 3 4K
