dji PHANTOM 3 4K Скачать руководство пользователя

Страница: 19 / 60

Aircraft

Phantom 3 4K

User Manual

Turning ON/OFF
Turning On:

Press the Power Button once, then press again and hold for 2 seconds to turn on. The

Power LED will turn red and the Battery Level Indicators will display the current battery level.

Turning

Off:

Press the Power Button once, then press again and hold for 2 seconds to turn off. The

battery power LED will flash when powering off the Phantom to allow automatically stopping

of a recording during the event recording wasn’t stopped.

Low Temperature Notice:

1. Battery capacity is significantly reduced when flying in low temperature (< 0°C) environments.

2. It is not recommended that the battery be used in extremely low temperature (< -10°C) environments.

Battery voltage should reach the appropriate level when operating environment with temperatures

between -10°C and 5°C.

3. End the flight as soon as the DJI GO app displays the “Low Battery Level Warning” in low temperature

environments.

4. Keep the battery indoors to warm it before flying in low temperature environments.

5. To ensure optimal performance of the battery, keep the battery temperature above 20°C.

6. The charger will stop charging the battery if the battery cell’s temperature is not within the operating

range (0°C ~ 40°C ).

In cold environments, insert the battery into the battery compartment and allow the aircraft for

approximately 1-2 minutes to warm up before taking off.

Checking the Battery Level

The Battery Level Indicators display how much power remains. When the battery is turned off, press

the Power Button once. The Battery Level Indicators will light up to display the current battery level. See

below for details.

Battery Level

LED1

LED2

LED3

LED4

Battery Level

87.5%~100%

75%~87.5%

62.5%~75%

50%~62.5%

37.5%~50%

25%~37.5%

12.5%~25%

0%~12.5%

=0%

The Battery Level Indicators will also show the current battery level during charging and

discharging. The indicators are defined below.
: LED is on. : LED is flashing.

: LED is off.

Содержание PHANTOM 3 4K





















































Результаты поиска

Содержание PHANTOM 3 4K

Отзывы:

Похожие инструкции для PHANTOM 3 4K

Бренды по названию

Популярные бренды

dji PHANTOM 3 4K, Руководство пользователя

Результаты поиска

Содержание PHANTOM 3 4K

Отзывы:

Похожие инструкции для PHANTOM 3 4K

Бренды по названию

Популярные бренды