dji Matrice600 Series Скачать руководство пользователя страница 10

Страница: 10 / 10

www.dji.com/support

DJI Support

DJI

技术支持

如果您对说明书有任何疑问或建议，请通过以下电子
邮箱联系我们：

[email protected]

。

中国印制

If you have any questions about this document,

please contact DJI by sending an email to

[email protected]

Printed in China.

YC.BZ.S01384.01

Compliance Information

FCC Compliance

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) This

device must accept any interference received, including

interference that may cause undesired operation.

Any changes or modifications not expressly approved by

the party responsible for compliance could void the user’s

authority to operate the equipment.

EU Compliance Statement

SZ DJI TECHNOLOGY CO., LTD. hereby declares that this

device is in compliance with the essential requirements and

other relevant provisions of the EMC Directive.

A copy of the EU Declaration of Conformity is available

online at www.dji.com/euro-compliance

EU contact address: DJI GmbH, Industrie Strasse. 12,

97618, Niederlauer, Germany

Содержание Matrice600 Series











Результаты поиска

Содержание Matrice600 Series

Отзывы:

Похожие инструкции для Matrice600 Series

Бренды по названию

Популярные бренды

dji Matrice600 Series, Руководство пользователя

Результаты поиска

Содержание Matrice600 Series

Отзывы:

Похожие инструкции для Matrice600 Series

Бренды по названию

Популярные бренды