©2014 DJI. All Rights Reserved.
20
Scenario 3 - Single Video Source with Dual Remote Control
Use two remote controls to control gimbal and aircraft independently. Map the gimbal and aircraft control
channels to both of the remote controls through DJI LIGHTBRIDGE Assistant. In single video source mode,
the aircraft operator and gimbal operator use different remote control to reduce interferences.
Air system connection
：
1.
Connect Gimbal Port on air system to G7 port on DJI HD gimbal with supplied Gimbal cable (DJI HD
gimbal).
2.
Connect DBUS port on air system to DBUS port (X2 port) on flight control system with DBUS cable.
3.
Refer to gimbal and flight control system manuals to complete connection.
Ground system connection
：
4.
Connect remote control to the ground station via training port.
5.
Connect mobile devices or HDMI monitor to the master and slave ground station.
6.
Ground station displays DJI HD gimbal video signal.
