dji LIGHTBRIDGE Скачать руководство пользователя

Страница: 2 / 49

Disclaimer

Thank you for purchasing the DJI LIGHTBRIDGE. Please visit the DJI LIGHTBRIDGE page on

www.dji.com

regularly to keep up with product information, technical updates and manual corrections. Information in this

manual is subject to change without notice in line with product upgrades and updates.

Users must comply with local radio transmission laws and regulations when using this product. In using this

product, you hereby agree to this disclaimer and signify that you have understood all points completely. When

assembling this product, follow all instructions carefully. The manufacturer and seller assume no liability for any

damage or injury arising from the use of this product.

DJI is a registered trademark of DJI. Names of product, brand, etc., appearing in this manual are trademarks or

registered trademarks of their respective owner companies. This product and manual are copyrighted by DJI

written consent or authorization of DJI.

Содержание LIGHTBRIDGE
















































Результаты поиска

Содержание LIGHTBRIDGE

Отзывы:

Похожие инструкции для LIGHTBRIDGE

Бренды по названию

Популярные бренды

dji LIGHTBRIDGE, Руководство пользователя

Результаты поиска

Содержание LIGHTBRIDGE

Отзывы:

Похожие инструкции для LIGHTBRIDGE

Бренды по названию

Популярные бренды