dji Inspire 1 1345LS, Информация о продукте

Страница: 2 / 8

2
EN
Disclaimer and Warning
Congratulations on purchasing your new DJI™ product. The information in this
document affects your safety and your legal rights and responsibilities. Read
this entire document carefully to ensure proper configuration before use. Failure
to read and follow instructions and warnings in this document may result in
serious injury to yourself or others, damage to your DJI product, or damage to
other objects in the vicinity. This document and all other collateral documents
are subject to change at the sole discretion of DJI.
By using this product, you hereby signify that you have read this disclaimer and
warning carefully and that you understand and agree to abide by the terms
and conditions herein. You agree that you are solely responsible for your own
conduct while using this product, and for any consequences thereof.
You agree to use this product only for purposes that are proper and in
accordance with all applicable laws, rules, and regulations, and all terms,
precautions, practices, policies and guidelines DJI has made and may make
available.
DJI accepts no liability for damage, injury or any legal responsibility incurred
directly or indirectly from the use of this product. The user shall observe
safe and lawful practices including, but not limited to, those set forth in this
document.
Notwithstanding above, your statutory rights under applicable national
legislation are not affected by this disclaimer.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”)
and its affiliated companies. Names of products, brands, etc., appearing in this
document are trademarks or registered trademarks of their respective owner
companies. This product and document are copyrighted by DJI with all rights
reserved. No part of this product or document shall be reproduced in any form
without prior written consent of or authorization from DJI.
Introduction
INSPIRE™1 1345LS propeller mounting plate kit to mount the 1345 LS Quick-
Release Propellers onto the motors.
Installation
Tools Required: 2mm Hex Key/ Hex Screwdriver and LOCITITE 243 Adhesive