37
LATCH system must be securely stored
and the storage door completely closed
and lock. Failure to do this can result in
serious injury or death.
When LATCH is not
available, store the
LATCH system as shown.
See “Storing the LATCH
System” section for
complete instructions.
WARNING:
!
Rear-Facing Installation with
Vehicle Belt With Base:
1
Place base in the back
seat with taller side
against the back of vehicle
seat.
2
Rear
-Facing Use:
4-35 lbs (1.8-15.9 kg),
32” (81.2 cm) or less.
Belt lock off
MUST
be used when using this base.
Child and child restraint with base face the back of the
vehicle and child restraint is correctly installed in a back
seat.
NOTE:
Do not use the LATCH system when installing
with the vehicle lap or lap and shoulder belt.
continued on next page.
To release LATCH:
Push
in on release button and pull
LATCH adjuster away from
child restraint to loosen.
Unhook LATCH hooks.
Tip:
To help in loosening
the LATCH for removal,
push down on the child
restraint.
17
36
4358-4462B US onBoard 35lb 1/5/11 1:09 PM Page 39