45
5
With weakest hand at belt
path, tilt and push the child
restraint forward and
back, and from side to
side. If the seat belts do
not loosen, your child
restraint should be secure.
NOTE:
Some “play” from front to back or about an
inch from side to side is acceptable. If it moves more,
review “Knowing Your Vehicle Belts” and “The Locking
Clip” sections.
WARNING
!
Using this child restraint in any vehicle
seat where the lap belt cannot be
tightened securely and properly or where
it can be loosened by pulling on it can
result in serious injury or death.
44
Completely close and lock
the LATCH storage door.
NOTE:
Storage door
MUST
be completely
closed for use.
To store LATCH system:
Open the LATCH storage
door and attach the LATCH
hooks to the bar
upside
down
.
Lay the LATCH adjuster on
top of the hooks and tuck
belt end beside the adjuster.
Starting with the right
side and then the left side,
tuck the belt under the
under the LATCH belt tab
holders.
Storing the LATCH System
4
3
2
1
Check the angle indicator.
The ball should be
between the two marks on
the indicator that matches
the weight of your child.
Adjust base if needed.
NOTE:
Check the angle
indicator while parked on
level ground.
4
4358-4462B US onBoard 35lb 1/5/11 1:09 PM Page 47
