49
From the back, use a
screwdriver to press in on
lip of upper harness guides
and pop guides through the
front. Pull cover off
headrest.
Clean with warm sudsy
water, rinse clean and air
dry. Do not use bleach or
use other harsh cleaners.
Pull pad off the top of seat
and off of headrest.
3
4
Replace seat pad by reversing order; put pad on headrest
and replace upper harness guides. Starting from bottom
of child restraint, slip pad on shell; tuck in pad around
harness adjuster and over upper belt guides. Make sure
pad is under headrest and replace lower harness guides.
Rethread harness (see belt-positioning booster section).
From bottom of shell,
release the elastic straps at
the bottom of seat and the
large elastic straps on the
side of seat.
Adjust backrest to lowest
position. Remove both
lower harness guides
(A)
in bottom of seat under
recline stand.
Push harness guide lip
toward outside of shell
with one hand while
pulling harness guide from
the front with the other.
A
1
2
Remove Seat Pad for Cleaning
Remove base and harness as described in the
“Belt-Positioning Booster” section.
Upper Harness Guides
Lower Harness Guides
4358-3340E Elite_Lux 2/23/09 1:45 PM Page 51
