ESP
AÑOL
IT
ALIANO
NEDERLANDS
ENGLISH
FRA
NÇAIS
DEUTS
CH
7. POWER CONNECTOR
– Plug in power adapter here. DC adaptor can be used when the USB port
cannot provide enough power to the unit. Please use only a 6V DC adaptor.
8. POWER SWITCH (Adaptor / OFF/ USB power)
– Set the switch to AC ADAPTOR when using
external DC adaptor (not included), set to USB BUS POWER when using power provided from the
computer via USB.
9. USB CONNECTOR
– Used to connect a computer. It is recommended to use the USB Cable
included. Long or low quality USB cable may make the unit unstable.
10. C.F CURVE CONTROL
– Adjusts the shape of the crossfader curve from a quick cut for scratching
or to a longer fade for mixing.
11. OUTPUT JACKS
– These jacks send a left and right analog output signal from the USB audio
interface. Use the supplied RCA cables to connect these outputs to a main stereo system, like an
amplifier or active speakers.
12. INPUT JACKS
– You can connect playback devices to these input jacks, such as CD players,
turntables, SD players or USB players. These connections are for the inputs to the USB audio interface.
When connecting phono output turntables, be sure the corresponding switch is in the “PH” position.
When connecting line level output devices, be sure the corresponding switch is in the “LN” position
13. GND (GROUND TERMINAL)
– Be sure to connect turntable ground leads to the available ground
terminals. This will reduce the humming and popping noises associated with magnetic phono cartridges.
14. CHANNEL LINE LEVEL SELECTOR
- These switches are used to select the line levels type of the
related Phono/Line jacks.
Always be sure main power is shut off before switching the Line Level Selector.
CONNECTION
REAR PANEL
7
9 10
8
11
13
12
14
12
3
Содержание i-Mix MKII
Страница 40: ......
