7
ENG
LIS
H
DEUTSCH
FRAN
ÇAIS
ESP
AÑOL
DU
TC
H
IT
ALI
AN
O
4
34. PH/LN Input Jacks -
These jacks are inputs for a phono (RIAA) stage for magnetic
(MM) cartridge or a line level device.
35. CD Input Connectors -
Use to connect a DJ CD player or other component with line
level output.
36. LN/PH Selector Switches -
These switches are used to change the mode of phono
input jacks. When connecting turntable to these jacks be sure the switch is in the
phono position, and when using line level input devices select LN. Always be sure
main power is shut off before change the position of the Ln/Phone selector switch.
37. GND
38. Mic Input Connector -
Use for microphone input.
39. Fader start control jacks -
Connect these jacks to the fader input jacks of the CD
player using the 3.5mm stereo mini cord.
Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First,
connect all input sources and processors. Next, connect your microphone and monitor
headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio
receivers such as tape decks. Plug your mixer into AC power. Now you are ready to
switch everything on.
IMPORTANT: Always switch on your audio input sources such as turntables or CD
players first, then your mixer, and finally any amplifiers. When turning off, always
reverse this operation by turning off amplifiers, then your mixer, and then input devices.
Turntable
Sound system
Tape Deck
CD Player
Power
Supply
Power Amp.
Turntable
QUICK SETUP DIAGRAM
