DJ-Tech CD J-101, Руководство пользователя

Страница: 3 / 23

1 2 3 4 5
MAIN FEATURES
CONNECTIONS
CONNECTIONS
2
EN
GL
IS
H
DE
UT
SCH
FRAN
ÇA
IS
ES
PAÑ
OL
DUT
CH
IT
A
LI
AN
O
EN
GL
IS
H
D
EU
TS
CH
FRA
NÇA
IS
ES
PA
ÑOL
DU
TCH
IT
AL
IA
N
O
-
USB Powered
-
7 MIDI Messages
-
8 Selectable MIDI Channels
-
1 x 100mm Pitch Fader
-
1 x Touch Sensitive Jog Wheel with touch sensitivity adjustment
-
2 x Push buttons with LED Ring indication
-
1 x Rotary Encoder with “Push to switch” function
-
DJ Software for MAC/ PC included: DECKADANCE LE
1. Power Connector - Plug in power adaptor here. DC
adaptor can be used when the USB port cannot provide
enough power to the unit. Please use only a 6V DC
adaptor.
2. Power Switch (Adaptor / OFF/ USB power) - Set the switch
to adaptor when using the exclusive adaptor, set to USB
bus power when using power provided from the computer via USB.
3. USB Socket - Used to connect a computer.
4. Touch Knob - Adjust the sensitivity of jog wheel touch sensor.
5. MIDI Out - Rotate the MIDIOUT knob to select MIDI channel from 1 to 8. Every time MIDI channel is
changed, the PLAY and CUE LEDs will flash for indication.
1. Install the DJ software from the software CD included. Follow the instruction to finish the installation.
You may need to enter the serial number for the software during installation. The serial number can
be found on the paper pocket of the software CD.
2. Connect the CDJ-101 to Computer USB port. Driver will be installed automatically. No Driver is
needed.
You can use the CDJ-101 alone or use with other 101 series controllers (including VTT-101,
DJM-101 and MIX-101) at the same time. Sample connection as below:
Note: If you are using a USB Hub for connection, it is recommended to use a Powered USB hub to
ensure the stability of the setup.
VTT-101:
Deck A
MIDI CH1
DJM-101:
Deck A&B
MIDI CH1
CDJ-101:
Deck B
MIDI CH2
MIX-101:
Deck A&B
MIDI CH1
Computer
Powered USB Hub