DIYRE COLOUR DUO, Руководство по эксплуатации

Страница: 8 / 12

Block Diagram
Audio enters the Duo through either the MIC INPUT or LINE INPUT . The MIC INPUT can amplify the mic signal
up to 60dB, while the LINE INPUT has a fixed attenuation of -6dB. The MIC/LINE switch selects which input is
sent to the rest of the unit.
Signal is then sent to the Colours in series. Each Colour contains a bypass switch, and a dual-gang potentiometer
which controls gain before the Colour and attenuation after. The Colours feed a gain/trim stage to make up for
the gain or loss from the Colours. This signal then feeds the wet/dry mix stage, where it is summed with the dry
signal from before the Colour section. The COLOUR switch selects between the output from the mix stage or the
output from the MIC/LINE switch. This feeds the balanced output which pr6dB gain.
6