How to assemble the battery holder
Statement: the lamp wires cannot be inserted into the
output socket.
– – Please notice the place of anode and cathode when pit in the batteries
– – Rechargeable batteries are not blunt electricity
– – Rechargeable batteries can only be charged under adult supervision
– – Rechargeable batteries should be removed from the toy before charging
– – Different types of batteries cannot mix; Do not mix new batteries in use with
semi-used batteries.
– – Run out of battery should be removed from the toy
– – The power shall not be short circuit
Trim all the LED wiring to the same length.
Use a craft blade to carefully skim over the plastic to bare the copper
wire. Twist the same color wire together.
Twist the following wire together:
(I) WHITE wire from the battery box with the GREY wire
from LED bulb.
(II) GREY wire from the battery box with the WHITE wire from
LED bulb.
GREY wire from LED bulb
WHITE wire
from LED bulb
WHITE wire
from LED bulb
GREY wire
from LED
bulb
WHITE wire
from battery box
GREY wire
from battery box
GREY wire
from battery box
WHITE wire
from battery box
Place the battery box in the allocated space.
Roll and seal the duly twist
copper with the white tape provided.
Bag
Service
plate
Plant
Bar counter
Flower groove
Floor sign
Bar stool
Flower groove
Flower
Pot
plant
