Hikvision Intercom Setup Guide (v1.0)
September 2017
DIY Security Cameras (www.diysecuritycameras.com.au)
Page
6
6 Activate Intercom Devices
All Intercom devices need to be activated (ie with a strong password) before being configured for use. Activation can be
done via the iVMS4200 software tool.
Notes around the activation password
a.
Please make this a strong password.
b.
The activation password is the main admin configuration/setup password.
c.
This password is need to do any configuration on the Intercom devices via the iVMS4200 software.
d.
This password is different to the indoor station “admin” password, which can be set separately.
Plug in all the Intercom devices as per above diagram and they will booted up and power on. When powered on they will
appear at the bottom in “Online Devices” section of the iVMS4200 software.