Hikvision Intercom Setup Guide (v1.0)
September 2017
DIY Security Cameras (www.diysecuritycameras.com.au)
Page
21
5.
Navigate to Intercom->ID Configuration. Set “Device Type” to “Indoor Station”. Set “Room No:” as 1. Click
“Save”.
6.
Navigate to Network->Linked Network Configuration.
This is where we link our Master Indoor station to our Main Door Station. Main point to note here is that our
Main Door Station is also our SIP Server. Set the following parameters (as per our example):
a.
Main Door Station IP: 192.168.20.100.
b.
SIP Server IP: 192.168.20.100.
c.
Main Door Station Type: Main Door Station (V Series)
d.
Connect Mode: Same Network.
e.
Click Save
