Hikvision Intercom Setup Guide (v1.0)
September 2017
DIY Security Cameras (www.diysecuritycameras.com.au)
Page
19
8.
Navigate to Intercom->Id Configuration. Set Device Type to “Door Station (V series)”. All other parameters
can be left at defaults. Note “No:” 0 indicates a Master/Main Door Station. Click save.
9.
Navigate to Intercom->Dial. Set “Room No:” to 1 and click Save. This is the room number we use for our
master indoor station.
10.
Our Door Station is now configured, Close the configuration window by clicking on the X.
