Dixon ZTR 1001, Руководство оператора

Страница: 11 / 41

SPECIFICATIONS
The monocoque design chassis of the Model ZTR 1001 incorporates CMC laser
and CNC brake processes to form the twin 12 gauge side frames and 7 gauge
transmission and engine base plate.
The front body cover is made of rotational molded polyethylene. Front body
contains access panel for battery service.
Cut height approximately 1" to 4" via 7 position lift handle.
Each deck is stamped steel construction:
36"-11 gauge 2 blades
36" cut width
Electric clutch.
Each rear wheel is independently driven by chain and sprockets th rough a friction
mechanical drive.
15HP Kohler Command, 4-Cycle, Single Cylinder, Overhead Valve, Air-Cooled,
Pressure Lubricated, With Oil Filter, Vertical Shaft, Aluminum Head and Block with
Cast Iron Cylinder Liner.
Electric by key switch operation with safety interlocks on parking brake and blade
drive.
Front 9 X 350 X 4 ribbed tread.
Rear 1 6 X 6 . 5 0 X 8 Multi Trac Tread. .
Fuel: 2.7 gallons total
Engine: 2 quarts oil.
Width Overall width with deflector retracted:
36" deck: 39" 42" deck: 46 1/2" 50" deck: 52 1/2"
Length 77" overall.
Weight 36" deck: 494 Ibs. 42" deck: 510 Ibs. 50" deck: 532 Ibs.
Additional information provided in service instructions underthe individual
component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Model ZTR 1001
CHASSIS:
BODY:
MOWER DECKS:
42"-13 gauge 3
blades
42" cut width
50"-10 gauge
3 blades
50" cut width
BLADE DRIVE:
TRANSMISSION:
ENGINE:
STARTING SYSTEM:
TIRES:
CAPACITIES:
DIMENSIONS:
NOTE:
Page8