Dixon ZTR 1001, Руководство оператора

Страница: 12 / 41

CONTROLS
The Dixon ZTR has a unique transaxle that requires only two drive levers to control braking, turning,
speed, and direction.
On initial operation, set throttle speed on slow and operate with mower blade "OFF". To
avoid "over-controlling" the mower, use a light touch on the drive levers. Slight
movements are all that is necessary.
All controls are described from operators position:
PARKING BRAKE:
The parking brake used on the Model ZTR 1001 is designed to hold the mower from moving
and is
not intended for use in stopping the mower while it is in motion.
NOTE: Engine cannot be started unless the brake is applied.
Do not leave engine running for extended periods of time without the parking brake engaged.
TO SET PARKING BRAKE :
The hand operated parking brake bail and associated catch stop is located mid-
point between the control levers.
CAUTION BRAKE HANDLE IS SPRING TENSIONED
Grasp brake bail with one hand while releasing catch stop by
pushing downward with the other hand.
BRAKE BAIL WILL SWING UP AND FORWARD
Move brake bail downward until catch stop latch is fully
engaged.
To engage brake:
To release brake:
NOTE: Parking brake must be in RELEASED position in order to
activate electric blade clutch for mowing.
Page 9