background image

MAINTENANCE

34

-Dixon

WARNING!

Before performing any service or adjustment checklist
•  Engage the parking brake.
•  Place the Blade-switch in the disengaged position.
•  Turn the ignition switch to “OFF” position and remove the key.
•  Make sure the blades and all moving parts have completely stopped.
•  Disconnect the spark plug wire from all spark plugs and place the wire where it    

  cannot come in contact with the plug.

1)

 

First change after 5-8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours.

 

2) 

In dusty 

conditions, cleaning and replacement are required more often. 

3) 

Performed by authorized service workshop.

 

=  Described in this manual

  =  Not described in this manual

Check/adjust throttle and choke cables

Check the condition of belts, belt pulleys

Change the engine oil 

1)

Replace the engine oil filter

Clean/replace the spark plugs

Replace the fuel filter

Replace the air filter (paper filter) 

2)

Check the caster wheels (every 200 hours)

Replace the air cleaner’s pre-filter 

2)

 (foam)

Check/adjust the mower deck

Check the engine valve clearance 

3)

Perform the 300-hour service 

3)

lubricate according to lubrication Schedule

● ● ● ● ●

Check hydraulic oil at reservoir

Change hydraulic oil & filter (200 hours)

Maintenance

Before After

Daily

Weekly 

At 

least 

once 

each 

year

Maintenance interval 

in hours

25

50 100 300

Содержание 966985301









































































Отзывы: