background image

INTRODUCTION

6

-Dixon

Good Service

Dixon’s products are sold only in specialized retail stores with complete service. This ensures that you as 

a customer receive only the best support and service. Before the product is delivered, the machine has, for 

example, been inspected and adjusted by your retailer. See the certificate in the Service Journal in this operator’s 

manual.
When you need spare parts or support in service questions, warranty issues, etc., please consult the following 

professional:

Manufacturing Number

The machine’s manufacturing number can be found on the printed plate affixed to the right side in the engine 

compartment. Stated on the plate, from the top are:
The machine’s type designation (I.D.).
The manufacturer’s type number (Model).
The machine’s serial number (Serial no.)

Please have the type designation and serial number available when ordering spare parts.

The engine’s manufacturing number is stamped on one of the valve covers.
The plate states:
The engine’s model.
The engine’s type.
Code

Please have these available when ordering spare parts.

The wheel motors and hydrostatic pumps have a barcode decal affixed at the rear.

This Operator’s Manual belongs to the machine with 

the manufacturing number:

Engine

Transmission

Содержание 966985301









































































Отзывы: