SIID CONTROLLER PROGRAMING
Page 2 of 13
RD – RESETTABLE DATA
This section shows the user the vender accounting data since the time of the last counter reset. This data can be
reset either from this menu or by a DEX interrogation.
Press Select Button 1:
Shows the total cash collected since the last counter reset.
Press Select Button 2:
Shows the total number of vends since the last counter reset.
Press Select Button 3:
Shows the total number of vends by selection since the last counter reset.
Each selection automatically scrolls across the display.
Press Select Button 4:
This button zeros the resettable data described above. Hold button
"4"
for 5
seconds and "COUNTERS RESET" will be displayed. At this time, all
resettable data will return to "0".
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
S-P - SET PRICE
This function is used to set the price of each selection. When a select button is pressed, the price for that selection
will be displayed. If the button is held in, the price will increment or decrement. To change from increment to
decrement, release the select button and press it again. To set all selections for the same price: set desired vend
price on select button #1, then simultaneously press and hold select buttons 3 & 4 for five seconds, this will change
the vend price of all selections, both primary and secondary, to the price programmed to select button #1.
Note:
The SIID's multi-pricing capability allows you to set all selections to any price in the range of $0.00 to $99.95.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
C-D - COIN DUMP/COIN FILL MODE
COIN DUMP:
This section is used to dump coins from the coin mechanism while in "C-D" mode.
Press & hold Select Button 1:
Dump Nickels.
Press & hold Select Button 2:
Dump Dimes.
Press & hold Select Button 3:
Dump Quarters.
Press & hold Select Button 4:
Dump 4
th
tube in 4 tube changers.
COIN FILL MODE
This section is used to count coins loaded in the top (separator) of the coin mech. Insert coins in the top (separator)
of the coin mech. The total value of the coins will be displayed and will be counted in the DEX audit data, so the SIID
controller knows exactly how much change is in the coin mech.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
USER - USER OPTIONS MENU
This function is used to configure the vender to operate in the fashion best suited for the vender location. To move to
diagnostics (DIAG), press & hold select buttons 1 & 2 simultaneously, to enter the USER sub-menus press select
button 1. The following are sub-menus of the User Option Menu: "STS", "TIME", "DATE", "ESC", "LANG", "PROM",
"ECNT", "NF", "CR", "BILL", "LIM", "SEC", "ACD", " "FREE", "DST", "DSTR", "SCE", "COIN", "SSM", "MV", and
"RTN".
