SIID CONTROLLER PROGRAMING
Page 9 of 13
To Remove Days:
Press service switch, "ADD" will appear on display. Press service switch again, "DEL" will
appear on display. Press and hold any select button to scroll through days. Release select
button at desired day to turn off PR2D. Press service switch to complete PR2D decision. This
must be done for each day to be removed.
NOTE:
Only one secondary pricing on days may be made at a time. The service switch must be pressed before
and after each change.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
RTN - RETURN
This function is used to return to the User Options Menu.
Press select buttons 1 & 2 simultaneously to return to "S-P2".
Press select button 1 to return to "SEC".
Press select buttons 1 & 2 simultaneously to move to the next item on the menu.
ACD - SET ACD AUDIT BOX
(Note: This feature is available in specific software rev. levels only.)
This function is used to support the Greenwick Audit Box features when enabled. To view "ACD" setting, press and
release select button 1. The display will show "ENABLED" or "DISABLED". To change from "ENABLED" to
"DISABLED" press and release select button 1.
Press select buttons 1 & 2 simultaneously to move to the next item on the menu.
FREE - FREE VEND ENABLE
This function is used to allow 5, 6, and 8 column venders to be set on free-vend using a mechanical switch. The free-
vend enable must be turned on for the switch to allow free-vend, and a free-vend switch kit (491,742,600.04) must be
installed using installation instructions E004.X from Dixie-Narco.
Press Select Button 1:
Toggle free-vends on (ENABLED) and off (DISABLED).
Press Select Button 2:
To display the number of free-vends.
Press Select Button 3:
To clear or reset the free-vend counter.
Press select buttons 1 & 2 simultaneously to move to the next item on the menu.
DST – DAYLIGHT SAVINGS TIME
This function is used to turn the "DST" option on or off.
To show current "DST" condition:
Press any select button and the display will show the current setting.
To change the "DST" condition:
Press & hold Select Button 1 to turn "DST" on. Display will show "ON".
Press & hold Select Button 2 to turn "DST" off. Display will show "OFF".
Press & hold Select Buttons 1 & 2 simultaneously to move to the next item on the menu.
