803,842,850.41
Page 1 of 13
Revised 2/24/99
SIID CONTROLLER PROGRAMMING
0773-6201CS & HIGHER
The controller has two modes of operation:
NORMAL MODE:
In normal mode, the display will show a decimal point. If decimal
is blinking, this indicates an error or problem recognized in the
vender. When money is inserted, the display indicates the total
amount of the deposit. The select buttons are used to select the
product.
SYSTEM SET-UP/AUDIT/DIAGNOSTICS MODE:
System set-up/audit/diagnostics mode is entered when the vender
inner door is open and the service switch is pressed. The display
will show a list of error codes for errors that have occurred since
the door was last opened. "JC-#" is a jammed column, "SS-#" is a
select switch problem, and "EN-#" is an
enable error (board component failure).To acknowledge an error,
press any select button, at this time you will enter the menu. The display
will show
"HD"
at this time. Some of the menu items have sub-menus.
To move through the menus and sub-menus follow these instructions. To:
MOVE THROUGH MENU:
Press select buttons 1 & 2 simultaneously to scroll down through the
menu. While scrolling down through menu, release, press select buttons
1 & 2 simultaneously to scroll up through menu.
ENTER SUB-MENU:
Press and hold select button 1 to enter a sub-menu.
EXIT SUB-MENU:
With "RTN" on display, press and hold select button 1 to exit a sub-menu.
EXIT SYSTEM SET-UP/AUDIT/DIAGNOSTICS MODE:
Closing the inner door or a two-minute inactivity time-out will exit the system set-up/audit/diagnostics mode.
FRONT PANEL PROGRAMMING
SYSTEM SET-UP/AUDIT/DIAGNOSTICS MENU
HD – HISTORICAL DATA
This section shows the user the vender accounting over the life of the vender. Use the following select buttons to
view the total sales in dollars, total number of vends and the total number of vends for each selection.
Press Select Button 1:
Shows the historical total cash sales for the life of the vender.
Press Select Button 2:
Shows the historical total number of vends.
Press Select Button 3:
Shows the historical number of vends by selection. Each selection automatically
scrolls across the display.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
In-Line
Side-By-Side
Horizontal
