Dixie Narco DN552P-7, Техническое руководство

Страница: 11 / 76

PROGRAMMING P-SERIES
Page 11 of 76
FRONT PANEL PROGRAMMING
SERVICE MENU
HD – HISTORICAL DATA
This function shows the user the vender accounting over the life of the vender. Use the following select buttons to
view the total sales in dollars, total number of vends and the total number of vends for each selection.
Press Select Button 1: Shows the historical total cash sales for the life of the vender.
Press Select Button 2: Shows the historical total number of vends.
Press Select Button 3: Shows the historical number of vends by selection. Each selection automatically scrolls
across the display.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
RD – RESETTABLE DATA
This function shows the user the vender accounting data since the last counter reset. This data can be reset
either from the menu or by DEX interrogation.
Press Select Button 1: Shows the total cash collected since the last counter reset
Press Select Button 2: Shows the total number of vends since the last counter reset.
Press Select Button 3: Shows the total number of vends by selection since the last counter reset Each selection
automatically scrolls across the display.
Press Select Button 4: This button zeros the interval data described above. Hold select button “4” for 5 seconds,
“the display will go blank” then (“C RS”) “Counters Reset” will be displayed. At this time,
all interval data will return to “0”.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
S-P – SET PRICE
This function is used to set the price of each selection. When a select button is pressed, the price for that
selection will be displayed. If the button is held in, the price will increment or decrement. To change from
increment to decrement, release the select button and press it again. To set all selections for the same price: set
the desired vend price on select 1, then simultaneously press and hold buttons 3 & 4, the price set for select 1 will
be displayed. After 5 seconds the display will show (SPS) “Single Price Set”, this will change the vend price of all
selections, both primary and secondary, to the price programmed for selection 1.
Note: The SBC multi-pricing capability allows you to set all the selections to any price in the range of $0.00 to
$99.95.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
C-S – CASH SETTINGS
This function is used to configure credit handling rules for the vender. To move to “User Menu” (USER), press &
hold select buttons 1 & 2 simultaneously. Press button 1 to enter Cash Settings Menu. The following are sub-
menus of the Cash Settings: (CF) Fill Coin Mech, (CD) Dump Coin Mech, (CR) Coin Rules, (ESC) Escrow, (MV)
Multi Vend, and (RTN) Return.