XWEB 3000 – rel.1.3–
After receiving the address from your network Administrator the XWEB 3000 must be set with this
number.
REMEMBER: A setup wizard will guide you through the procedure. Please ensure you have an IP
address to use in network section.
Use a standard RJ45 network cable to connect the unit to your lan.
The Intranet method allows the connection to interact with XWEB 3000 from all the PC Clients. Insert
the net address assigned by the administrator into the Browser address bar. Bookmark the address
with personalised name for the future connections.
2.1.7.3 INTERNET CONNECTION
It is necessary a STATIC IP address for the XWEB 3000 which is normally assigned by the Provider of
your internet services (ISP net).
The Internet connection allows XWEB 3000 to be reached from all PC-clients. Insert the net address
assigned by the administrator into the Browser address bar. Bookmark the address with personalised
name for the future connections.
Ask your provider for more details about the rent of a the static IP.
This the internet system requirements for the best result:
•
Wide band connection.
•
At least 1 static IP addresses for the XWEB 3000.
The internet connection is established through a device called Router that receives and sends the
data as interface between an Intranet and Internet. The Provider also assigns the address of the
router that is called IP WAN.
Remember that the default value of the IP of the XWEB 3000 is:
192.168.0.200.
Depending on the contract the Provider can also supply the router, otherwise the user can buy it
separately.
REMEMBER: ask qualified personnel for the router installation by using these information:
Used ports that are mapped to the LAN side:
•
80 (used for the http:// access)
•
22 (used for SSH connection)
14/111
1592010600
•
443 (used for SSL protected connection)
