3
Chapter 1: Product Introduction
Hardware Installation
Description: The mounting surface for the bracket installation needs to
withstand at least three times the total weight of the bracket and IP camera.
1. Position the placement sticker at the desired installation location (wall or
ceiling).
2. Drill the three mounting holes on the sticker.
3. Use the expansion bolts included in the accessory bag and insert the bolts
into the drilled holes.
No.
Name
1
IP camera
2
Mounting screws
3
Expansion bolts
4
Placement sticker
5
Wall or ceiling surface
4. Align the IP camera to the expansion bolts then secure the camera to the
surface with the screws included in the accessory bag.
5. Connect the external cables to the IP camera according to the usage
requirements.
6. To adjust the camera angle to the desired field of view, loosen the hex
screws on the camera using a hex wrench. (Please refer to the figure below).
7. After adjusting the camera angle, screw the hex screws back into place to
secure the camera.
