IV
Preface
P
REFACE
R
EGULATORY
C
OMPLIANCE
S
TATEMENTS
This section provides the FCC compliance statement for Class A devices and
describes how to keep the system CE compliant.
D
ECLARATION
OF
C
ONFORMITY
FCC
This equipment has been tested and verified to comply with the limits for
a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. Operation of this equipment in a residential area
(domestic environment) is likely to cause harmful interference, in which case
the user will be required to correct the interference (take adequate measures)
at their own expense.
CE
The product(s) described in this manual complies with all applicable European
Union (CE) directives if it has a CE marking. For computer systems to remain CE
compliant, only CE-compliant parts may be used. Maintaining CE compliance
also requires proper cable and cabling techniques.
S
AFETY
I
NFORMATION
Before installing and using the device, note the following precautions:
ƒ
Read all instructions carefully.
ƒ
Follow all warnings and cautions in this manual.
ƒ
Do not place the unit on an unstable surface, cart, or stand.
ƒ
Do not use the camera in extreme temperature conditions. Please use the
camera within -20ºC to 50ºC. Air vent is required at high temperature.
ƒ
Do not use or store the camera in humid environment. It may cause poor
image quality.
ƒ
Do not use the camera in unstable lighting conditions. Inconsistent lighting
or flickering may cause poor image.
ƒ
Never use the camera close to gas or oil leak. It may not operate properly.
ƒ
Do not disassemble the camera. There is no user serviceable part inside.
ƒ
Do not drop the camera or apply force on it. It may cause a malfunction.
ƒ
Avoid using the system near water, in direct sunlight, or near a heating
device.
ƒ
Never face the camera to strong light for long periods of time. It may
damage the CMOS sensor.
External power supply cannot be used with PoE simultaneously
or it will damage the camera.
When this camera is installed near wireless communication
devices that emit strong electromagnetic field, irregularity
such as noise may appear in the image.
