NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
EMK
11/12/14
CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
PLB-201
PLANNING & LAYOUT BENCH
ASSEMBLY INSTRUCTIONS
REV A
4 OF 5
NTS
EMK
11/12/14
NOTE:
1.
STEP 4:
INSERT STRETCHER ONCE LEG BRACE IS IN POSITION. ATTACH STRETCHER
USING THE CONFIRMATS PROVIDED. GO BACK TO STEP 2 AND TIGHTEN UP
THE HANGER BOLTS FOR EACH LEG USING A
1
2
" WRENCH OR
1
2
" SOCKET AND
TORQUE WRENCH, TO A MINIMUM OF 12FT LBS BUT NOT TO EXCEED 17FT LBS .
STEP 5:
FLIP APRON ASSEMBLY OVER ONTO THE LEGS. ALIGN THE HOLES ON THE STRETCHER TO THE HOLES ON THE LEFT SIDE OF THE
CABINET. TAKE OUT THE TOP DRAWERS TO ATTACH THE STRETCHER FROM INSIDE THE CABINET. SCREW CONFIRMATS INTO THE
STRETCHER.
OUTSIDE OF CABINET SHOWN
INSIDE OF CABINET SHOWN
CONFIRMATS
STRETCHER
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\PLB-201.dwg, 11/30/2015 9:58:26 AM, DWG To PDF.pc3
