NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
EMK
11/12/14
CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
PLB-201
PLANNING & LAYOUT BENCH
ASSEMBLY INSTRUCTIONS
REV A
5 OF 5
NTS
EMK
11/12/14
NOTE:
1.
STEP 6:
POSITION APRON ASSEMBLY SO INNER HOLES OF THE BRACKETS ON INTERNAL
APRON ARE LINED UP WITH THE TWO HOLES ON LEFT SIDE OF CABINET (THE
FRONT APRON WILL BE FLUSH WITH THE FRONT OF THE CABINET AND THE BACK
APRON WILL BE FLUSH WITH THE BACK OF THE CABINET). INSERT THE TWO BOLTS
AND WASHERS THAT ARE PROVIDED INTO THOSE HOLES AND TIGHTEN. ADJUST
LEG LEVELERS TO LEVEL APRON ASSEMBLY WITH THE CABINET.
STEP 7:
SET TOP ON UNIT AND ADJUST FOR PROPER OVERHANG (1" OVERHANG
ON THE SIDES AND 2" OVERHANG ON THE FRONT AND BACK). ATTACH TOP
BY GOING INSIDE CABINET AND SCREWING UP THROUGH THE TOP (NOT
SHOWN) AND BY GOING UNDERNEATH UNIT AND SCREWING INTO THE
POCKET HOLES ON THE APRON ASSEMBLY. MAKE SURE SCREWS ARE TIGHT
AND TOP IS SECURE.
STEP 8:
PUT TOP DRAWERS BACK IN. PLACE UNIT IN DESIRED LOCATION.
INTERNAL APRON
BRACKETS
ATTACH APRON ASSEMBLY
TO CABINET THROUGH HERE
AND ON OTHER BRACKET
FRONT APRON
BACK
APRON
COMPLETE UNIT SHOWN
POCKET HOLES
CLOSE UP OF APRON ASSEMBLY SHOWN
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\PLB-201.dwg, 11/30/2015 9:58:31 AM, DWG To PDF.pc3
