background image

 

 29

5.3  Field Replaceable Unit (FRU) Information 

Board information, such as serial number, date of manufacture, OEM name, part number, etc., are 
retrievable from the FRU.  It complies with the IPMI FRU 1.0 Specification.  The information in the FRU 
can be customized to add other product information, such as asset tag, other part numbers, etc. 

5.4 Sensors 

The sensors that the cPB4612 supports with the IPMI System Monitor can be retrieved in the Sensor 
Data Records (SDR’s) via normal IPMI commands.  They include: 

 

 

System Ambient Temperature   

+12V 

 CPU 

Temperature 

  +1.5V 

 

VTT DDR 

 

 

 

+1.8V 

 CPU 

Core 

Voltage 

  ONCTL# 

 

+3.3V   

 

 

 

SLOT 

 +5V 

    Front 

Latch 

 

These sensors (with the exception of ONCTL and SLOT), when enabled by the BMC, will generate 
sensor events on the IPMB.  These events will normally be logged by the BMC and time-date stamped.  
On temperature and voltage sensors, if sensor readings cross any of the non-critical, critical, or non-
recoverable thresholds, the IPMI System Monitor will generate IPMB event data to inform the BMC.  The 
IPMI System Monitor allows the BMC, via IPMI commands, to override its sensor thresholds 

 

5.5 Firmware 

Updates 

Firmware updates are possible through either the serial or IPMB interface.  A special utility will be 
provided should a firmware update be necessary. 

5.6  SMBus Address Map 

The table below lists the location, function, and address of each SMBus device used on the cPB-4612. 

Device cPB-4612 

Function 

Address 

ICH SMBus 
(slave) 

6300ESB ICH  

1000 100 

Board clock 
generator 
(CK409B) 

Board clock generator (CK409B) 

1101 001 

SO-DIMM0 SO-DIMM0 

1010 

000 

SO-DIMM1 SO-DIMM1 

1010 

001 

 

Содержание CPB-4612











































































































Отзывы: