w
w
w
.d
iv
e
rs
e
-t
e
c
h
n
o
lo
g
ie
s
.n
e
t
Page 16
03/2018
Recording a new reading into the database
Make a short press of the
ℹ
power key. A new line will be
displayed at the bottom of the screen.
This will display the current record number on the left, the Ferrite
measurement value to be stored and the record ID. If the record ID
was previously empty then this will default to the current record
number, otherwise it will be the record ID currently stored in the
database.
The cursor will be flashing over the first character of record ID.
Use the
�
up or
�
down keys to select character (0-9, space or
A-Z).
Use the
�
tick key to go to the next position in the record ID.
Use a long press of the
�
tick key to store the record. The next
record number will be displayed on the top line.
If you do not wish to save the record make a short press of the
ℹ
power key. The instrument will confirm record has not been saved.
Note to move the next saved record to a particular record number
use the PC software. Alternatively use viewlog on the instrument to
get to a multiple of 4 (i.e. 0, 4, 8 etc.) and then use the up key
�
to advance the record number (displayed at the top left). The ID for
this record will be displayed on the left line (provided not in
Transfer calibration mode).
Software -
