Dive Gear Express XTRA Second Stage, Руководство по обслуживанию

Страница: 20 / 25

9. Carefully insert the Adjustment Screw (30) and Spring (34) assembly into the Spindle (19) and begin to
screw it in. The lever will rise as this is done. Screw the assembly in until you can see clearly through the hole
for the Spring Pin (21). – Fig.28
Fig. 28
10. Insert the spring pin and push it into place with the blunt end of the brass pick.­ Fig. 29. The sharp brass
pick may be used to guide it in. An equal amount of pin should be present on each side. If this is not done,
the Venturi Lever may hang up on the pin that is sticking too far out.
Fig. 29
11. Place the lubricated O­ring (17) on the Venturi Lever (18) and slide it onto the Spindle/Lever assembly.
Make sure that it moves freely around the Spindle (19). Note the position of the lever relative to the air
outlet. ­Fig. 30.
Fig. 30