Dive Gear Express XTRA Second Stage, Руководство по обслуживанию

Страница: 18 / 25

3. Using the In­Line Tool, insert the Orifice (15) into the threaded end of the Spindle (19) – Fig. 20, and when
the threads engage, turn it in 3­4 turns. Actual adjusting of the Orifice will be done later. – Fig. 21
Fig. 20 Fig. 21
4. Assemble the Shuttle Valve (25), Spring (27), and Counter Balance Cylinder (28). With the assembly
oriented, as shown in Fig. 22, insert it into the Spindle (19). Pay special attention to the position of the notch
on the Shuttle Valve. This is where the Lever (20) engages the Shuttle Valve.
It must be oriented in this
manner.
Note also the position of the hole for the Spring Pin (21). – Fig. 22. Lever removed for clarity.
Fig. 22
5. Carefully insert the assembly the rest of the way into the spindle. It is critical to maintain this orientation.
Slide it in until the notch is clearly visible in the small square window. – Fig. 23.
Fig. 23