Operating Instructions
64419 A 99/03
page 15 - 17
6
5
3
4
4.2
Repairs
Switch off motor
and
pull out power cable
before carrying out any repairs
inside the machine, in order to avoid danger of injury and electric shock !
The electrical wiring diagram for this grinder is placed either:
- inside of the bottom section of the housing panel or
- on the inside of the bottom plate
4.2.1
Unblocking discharge tube
-
Switch off motor and unplug power cable.
-
Unblock discharge tube from outside as far
as possible.
-
Set adjusting knob
(2)
to coarse grinding
scale position 9 and switch motor on again.
This frequently unblocks the grinder and
clears any foreign bodies in the grinding
unit.
-
If the motor still does not run, continue
according to 4.2.2.
4.2.2
Unblocking grinding unit
-
Switch off motor and unplug power cable.
Remove coffee beans from hopper
(4)
(use
a vacuum cleaner if necessary).
-
Dismantle cover lid
(3)
and hopper
(4)
.
-
Remove stationary disc flange
(5)
by
releasing screws
(6)
with a large screw-
driver (see illustration).
2
