17
2
Introduction
DTK-HT1000 User Guide
DTK-HT1000 User Guide
Thank you for purchasing the DTK-HT1000 Home Theater Power Conditioner. The HT1000
provides clean AC power to sensitive home theater equipment, ensuring the best possible
picture and sound quality. It also protects all AC outlets, Cable/Satellite connections, network
connections, and telephone lines from incoming surges.
Features
Six isolated AC filter banks (2 outlets each), with filtering circuitry tailored for the different
connected equipment – plasma or LCD televisions, audio and video components, and
amplifiers.
Front LCD shows voltage and current draw (total or per bank), wiring and surge protection
integrity, and status of switching and outlet delay.
Outlet banks are programmable for Always On or Delay operation, with 5, 10 or 15 second
delay settings.
Remote AC and DC triggers allow remote activation and shutdown of switched outlets.
Thirteen NEMA 5-15R Outlets, 6 isolated banks of 2 outlets, plus one front-mounted
convenience outlet.
Electrical Rating: 15A, 125VAC, 60Hz, 1875 Watts.
Surge Current Capacity: 373,500 Amps.
Surge Energy Joule Rating: 7266J.
Surge Protection Modes: L-N, L-G, N-G (Power)
UL Clamping Voltage: 330V
EMI/RFI Filtering: up to 70 dB, 150kHz – 100MHz
DC Trigger Input
• Connector: 1/8” (3.5mm) mono mini-plug
• Voltage: 3 - 30V DC
• Current: 10 mA
DC Trigger Output
• Connector: 1/8” (3.5mm) mono mini-plug
• Voltage: 12V DC
LAN Protection
• Connectors: RJ45, 8-pin (1 In & 1 Out)
• Wires Protected: Pins 1, 2, 3 & 6
• Data Speed 100Mbps ( Cat. 5 )
TEL/FAX/Modem Protection
• Connectors: RJ11, 3 pair (1 In & 2 Out)
• Wires Protected: Pins 3 & 4
• Surge Energy Joule Rating 160 Joules
DSS / Coax Cable Protection
• Clamping Level: <75V
• Insertion Loss: < 0.1 dB
• Connectors: Female “F”, Gold Plated ( 4 In & 4 Out)
Warranty: Three Year Limited Warranty
Connected Equipment Protection Policy: up to $150,000
met. This Policy covers damage caused by voltage spikes and surges, which enter the connected
equipment via surge-protected wires. It does not cover damage from continuous over-voltage
such as occurs when the power company crosses lines, open neutrals, or direct lightning strikes.
QUALIFYING CONDITIONS FOR CONNECTED EQUIPMENT COVERAGE:
1. A DITEK HT1000 Home Theater Power Conditioner designed for the application must have
protected all wires leading into the damaged equipment. The presence of a competitive brand
of power conditioners or surge protectors in the circuit will void coverage.
2. A transient voltage surge must have entered the damaged equipment via surge-protected wires.
3. The DITEK Product must be installed in accordance with DITEK's installation instructions.
All installations must comply with the applicable electrical and safety codes set forth by the
National Electrical Code (NEC) or Canadian Electrical (CE) Code and any local codes.
4. The DITEK HT1000 Home Theater Power Conditioner must show signs of surge damage.
5. The connected equipment shall be UL or CSA listed and/or shall have all applicable and pertinent
agency approvals and certifications.
6. Any claim under this Connected Equipment Protection Policy must be made within ten (10) days
of the date of damage to the equipment.
7. The Connected Equipment Protection Policy covers only standard indoor equipment and only
in the United States or Canada.
WHAT IS NOT COVERED UNDER THIS CONNECTED EQUIPMENT POLICY:
1. Damage to electronic equipment resulting from a transient voltage surge on unprotected
wires or lines.
2. Restoration of lost data and/or reinstallation of software.
3. Damage caused by lack of grounding.
4. Damage caused by abuse, misuse, alteration or negligence.
5. Damage caused by accidents, fires or natural disaster such as wind, flood or direct lightning.
6. DITEK shall in no way be liable for any damages not specifically included in this policy, including,
but not limited to, direct, indirect, incidental, consequential or multiple damages arising from the
use of the Product or damage to the connected equipment, regardless of the legal theory on which
the claim is based. DITEK shall not be held liable for losses due to loss of software, cost of substitute
equipment, facilities or services, loss of profits, loss of revenue, or claims of third parties including
customers and insurance companies.
