iGreen
Brief Guide Ver:002
_________________________________________________________________________________________________________ _______________________________________
________________________________________________________________________
Preliminary
1 / 6
The
U
SER
G
UIDE
1 Description of the devices
1.1 Wippy: the remote control
1.2 eConv devices
Electrical connections to eConv
Max power:
16A to 230Vac
3600 Watts
Description of the Status indicator
No Light
Device connected
Yellow
Device not connected
Yellow
Blinking
Connection in progress
Green
Lights for 5 seconds to indicate
that there is a connection
Red
Hardware errors (call assistance)
1
Status indicator
Command button to
connect devices
2
From Main Power
Pilot Wire
Live
Neutral
Neutral
Live
Earth
Earth
To Electric Radiator
Uses 3 alkaline batteries
types AAA or LR03
IMPORTANT
When installing the system
always
connect and
bind the
eConv+ or
with the
Wippy first (easily identified as they have a
battery). An eConv+ or is the main
communicator, once this is binded with the
Wippy, bind each other eConv unit one by one.
Non compliance will result in system failure.
