iGreen
Brief Guide Ver:002
_________________________________________________________________________________________________________ _______________________________________
________________________________________________________________________
Preliminary
4 / 6
Mode selection in the eConv device
Menu item
Pilot wire action
M
ENU
O
FF
Putting in stop state
M
ANUAL
C
OMFORT
Putting in Comfort mode (the radiators
work with their set-point temperature
C
OMFORT
-1
Working with their set-point temperature
minus 1°C
C
OMFORT
-2
Working with their set-point temperature
minus 2°C
B
ACKGROUND
Working with their set-point temperature
minus 3,5°C
F
ROST
P
ROTECTION
Working to 7°C set-point
O
VERRIDE
Short (Hours)
Putting in Comfort or Background or
Frost Protection for a time settable into
24 hours
Long (Days)
Putting in Comfort or Background or
Frost Protection formore days
Mode selection in the eSwitch device
Menu item
Action
M
ENU
O
N
Switch on the relay
O
FF
Switch off the relay
S
TAND BY KILLER
Switch off the relay when the appliance is on stand-by
and the consumption is below the watt limit upper for a
time settable in
OTHERS
item
O
VERRIDE
Short (Hours)
Putting inO
N
or O
FF
or S
TAND
B
Y
K
ILLER
for a time
settable into 24 hours
Long (Days)
Putting inO
N
or O
FF
or S
TAND
B
Y
K
ILLER
for more days
Programming and setting in Auto Mode
All devices can be set the modes for 24 hours each day every week.
- Set the program and send to the device
- Put in Auto mode to activate the program
Set the program in the
eConv
.
From the main device screen example 11 select Menu and proceed as follows:
Menu
Prog
Set the mode in all hours from 0 to 23
Use
to select the mode and
to select the hour
Use
Copy & Paste to repeat the daily program for the other days
Use
to scroll the days of the week.
Press
Send
to send to device and finish the operation.
Frost Prot.
mode
Background
mode
Comf-2 mode
Comf-1 mode
Comf mode
