DITECH DT564206, Инструкция по эксплуатации

Страница: 28 / 36

28
ENG
DEU
Commissioning
ENG
7.4 Teach-off of the room control unit from a heating zone
1. Choose the channel through which the room control unit shall be taught-off, by a short press of the
Select key (B). Pressing 1x = HZ1 / Pressing 2x = HZ2.... Pressing 10x = HZ10
2. Press the System key (A) and the Select key (B) simultaneously until the LED of System key (A) of the
base station lights up in green.
If the room control unit is logged on to several DITECH Smart Home iL base stations, this
process must be repeated for every base station.
During this process, the room control unit is learnt off all heating zones of the selected base
stations.
3. Resetting the room control unit to factory settings (see manual of the respective room control unit).
7.5 Teach-in with DITECH Smart Home iL central unit
For a control via the DITECH Smart Home iL app, the teach-on of the DITECH Smart Home iL base sta-
tion must be performed via the DITECH Smart Home iL central unit (DT5637).
Prior to the conversion from standalone operation to operation via the DITECH Smart Home
iL central unit (DT5637), the factory settings must be reset for the participating devices. The
teaching process of the devices is subsequently performed via the DITECH Smart Home iL
App.
Teach-in the device as follows:
Ö The DITECH Smart Home iL central unit has been set-up via the DITECH Smart Home iL app (see
manual DT5637).
1. Open the DITECH Smart Home iL app on your smart phone.
2. Select the menu item Teach-in device.
3. Press the System key (A) shortly until the LED flashes slowly in orange. The teach-in mode is active
for three minutes.
4. The device will be displayed automatically in the DITECH Smart Home iL app .
5. For confirmation, enter the last four digits of the device number (SGTIN) or scan the supplied QR
code. The device number can be found below the supplied QR code or directly on the device.
The LED will light up in green after a successful teach-in process. The process must be repeat-
ed if the LED lights up in red.
6. Follow the directions of the app.