SK5TR
Attachment Operator’s Manual
Publication number: 054-096; page 2 of 9
Safety Alerts
Connect Attachment
1.
Position attachment
on level surface with
enough space
behind it to
accommodate unit.
2.
Start engine.
3.
Tilt mount plate (2)
forward.
4.
Position mount plate
in the upper lip of the
receiver plate (1) on
attachment.
5.
Raise lift arms while
tilting back mount
plate.
6.
Pins will
automatically
engage.
7.
Ensure lock pins are
engaged by rotating
attachment down.
Verify that bottoms of
lock pins are visible
under attachment
plate.
1
DANGER decal. See
Parts Manual for
replacement part
numbers.
2
DANGER stripe decal.
See Parts Manual for
replacement part
numbers.
3
Lift point.
4
Tiedown location. See
Transport chapter for
more information.
274-318
5
Moving
digging teeth. Contact will
cause death or serious
injury. Stay at least 6’ (2m)
away.
6ft/2m
IMPORTANT:
Before connecting attachment to unit,
ensure that mount and receiver plates are free of dirt
and debris and that latch handles are down.
IMPORTANT:
Attachment should be raised enough to
clear the ground. Mount plate should be tilted back fully.
t43om006w.eps
t05om026c.eps
1
2
t43om007w.eps
