20
Operating instructions
Operating instructions
21
Contact chain/alarm confirmation
The acceptance of the direct call
must be confirmed by the receiver
(acknowledged) by pressing the
“#”
button on their telephone. The person
being called will receive a message
requesting them to confirm. This spoken
phrase is available in several languages.
If the emergency call is not confirmed within
20 seconds,
disty
Notruf stationär
automatically calls the
second number and, if this is not accepted, the next pre-
programmed number. This process is repeated until personal
contact to a trusted person has been established.
Range warning
If you move to the limits of the
disty
Notruf stationär
range,
an alert will sound (only during phone call).
Battery warning
When the battery level is low, the red LED flashes and a signal
tone sounds at increasingly shorter intervals. Then the batteries
should be replaced by new ones.
#
This key must be pressed
by the receiver of your call in
order to accept the direct call.
(This ensures that an answering
machine does not accept the
call). Please inform your
trusted contacts!
Troubleshooting
When I press the alarm button to trigger an alarm,
nothing happens.
- Check whether the LED is flashing red. If so, your
disty
Notruf stationär
is not connected to the base station.
Please note that you must be within the range of the base
station (max. range in building: approx. 50 m).
- Check whether
disty
Notruf stationär
has sufficient battery
power. If necessary, replace the batteries.
I can trigger the alarm, but cannot make contact.
- Make sure that the
disty
Notruf stationär
is within the
reception range of the base station (up to 50 m in the
building and up to 300 m outdoors).
- There could be a telephone network problem. If you also
cannot make a connection using your normal telephone,
then there is a telephone network error.
Alignment of the user interface
Microphone
and LEDs
(visual
display)
Integrated
loud speaker
Alarm
button
EN
EN
