18
Operating instructions
Operating instructions
19
Assembly
Now mount the device, for example on a plastic tile using two
sheet screws. For other assembly locations, for example on
the wall or on a wooden board, please use the appropriate
materials.
As an example, here are the working steps for
assembly on the wall:
1. Drill two holes with a diameter of 6 mm at a distance
of 48 mm into the wall.
2. Insert the anchor bolts.
3. Now stick the screws through the mounting holes on the
disty
Notruf stationär
and tighten the screws to mount
the device.
4. Check for proper
functionality by
pushing the button!
5
6
,4
1
4
23
48,3
56,3
Mode of operation
Make a direct call
Press the alarm button.
disty
Notruf stationär
is now calling
the first of the pre-programmed telephone numbers. The red
LED flashes and shows that the connection is being established.
Personal alarm
This feature is not available in all devices.
Although the device only has a single button, it is still possible
to ring a specific second alarm number. The required settings
for this can be found in the “ProgrammerApp” under the tab
„Configuration 2“.
To dial this second number, you need to press the emergency
call button twice and quickly. The first emergency call number,
which is activated by pressing the button for at least 1 second,
is not affected by this.
Cancelling a direct call/an alarm
If you accidentally trigger an alarm, simply press the alarm
button again.
EN
EN
