8
9
Slide Rails (Cabinet)
reMoVe aND re-iNstaLL
The compactor’s slide rails may become bent from
misuse or the ball bearings may become worn.
1. Remove trash bucket assembly. (See Trash Bucket,
Remove.)
2. Remove two Phillips head screws from the front and
rear of the left track slide rail. NOTE: It is necessary
to slide the inner rail to access both screws.
3. Remove the slide rail from the cabinet.
4. To re-install, place slide rail onto the three “spring
clips” inside of the cabinet. Align holes in rail with
bracketed holes on inside of cabinet and secure
with two Phillips head screws. Repeat for other side.
Slide Rails (Bucket)
reMoVe aND re-iNstaLL
1. Remove four Phillips head screws that secure the
left slide rail to the bucket. Remove the rail.
2. Repeat Step 1 for the right slide rail.
3. Installation is the reverse of removal.
section B – Cabinet
RAIL
SPRING CLIPS
SCREW
NUT
SCREWS
RAIL
BUCKET
SCREW
SCREWS
