6
7
section a – installation
CorD CLaMp
The compactor is equipped with a 6-ft. long power
cord. Use the cord clamp to prevent excess power
cord from
being pin
ched beneath the cabinet during
installation or service.
Leveling the Compactor
Your compactor has four adjustable levelers; (2) rollers
in the rear and (2) legs in the front. They allow you
to
adjust for uneven floors and also trim the unit up to fit
an undercounter installation.
to level the back of the compactor:
Tip the back of compactor up and onto a wood block.
Loosen the adjusting screws only far enough to move
the rollers to a higher or lower slot. Retighten the ad-
justing screws and remove the wood block.
to level the front of the compactor:
Tip the front of compactor up and onto a wood block.
Turn the leveling legs in or out to the desired position.
Remove the wood block.
CORD
CLAMP
BACK OF
COMPACTOR
WOOD
BLOCK
ADJUSTING
SCREWS
SLOTS
ROLLERS
FRONT OF
COMPACTOR
WOOD
BLOCK
LEVELING
LEGS
